Past Events
VIEW: Open Web Floor Training Levels 1 and 2
3 August 2010 to 4 August 2010
ITW Industry, Truro
Suitable for all levels, this course explains how to design SpaceJoist and FloorTrus jobs in Layout and TrusCAD. Note: Levels 1 and 2 can be completed in a one day course, for existing user of the Truss Layout software.
VIEW: Layout & Truscad Levels 1, 2 or 3
6 July 2010 to 8 July 2010
ITW Industry, Truro
Courses will be held at the level appropriate for the trainee.
Layout Level 1:
Suitable for the beginner; the purpose of this training course is to ensure that the individual attending the course leaves with a working knowledge of how to use the Layout program.
Layout Level 2:
Suitable for the Intermediate truss designer; as a progression from level 1 or for trainees with roof truss design experience but who are new to the VIEW software.
Layout Level 3:
Suitable for an advanced roof truss designer; as a progression from level 2, this course involves complicated roof truss framing.
TrusCAD Level 1:
Suitable for the beginner; the purpose of this training course is to ensure that the individual attending leaves with a greater knowledge of trussed rafters and the VIEW software.
TrusCAD Level 2:
Suitable for the Intermediate truss designer; as a progression from level 1 or for trainees with roof truss design experience but who are new to the VIEW software.
TrusCAD Level 3:
Suitable for an advanced roof truss designer; as a progression from level 2, this course goes into depth on many aspects of loading.
VIEW: Open Web Floor Training Levels 1 and 2
1 June 2010 to 2 June 2010
ITW Industry, Truro
Suitable for all levels, this course explains how to design SpaceJoist and FloorTrus jobs in Layout and TrusCAD. Note: Levels 1 and 2 can be completed in a one day course, for existing user of the Truss Layout software.
Layout & Truscad Levels 1, 2 or 3
8 September 2009 to 10 September 2009
ITW Industry Office, Truro
Courses will be held at the level appropriate for the trainee.
Layout Level 1:
Suitable for the beginner; the purpose of this training course is to ensure that the individual attending the course leaves with a working knowledge of how to use the Layout program.
Layout Level 2:
Suitable for the Intermediate truss designer; as a progression from level 1 or for trainees with roof truss design experience but who are new to the VIEW software.
Layout Level 3:
Suitable for an advanced roof truss designer; as a progression from level 2, this course involves complicated roof truss framing.
TrusCAD Level 1:
Suitable for the beginner; the purpose of this training course is to ensure that the individual attending leaves with a greater knowledge of trussed rafters and the VIEW software.
TrusCAD Level 2:
Suitable for the Intermediate truss designer; as a progression from level 1 or for trainees with roof truss design experience but who are new to the VIEW software.
TrusCAD Level 3:
Suitable for an advanced roof truss designer; as a progression from level 2, this course goes into depth on many aspects of loading.
Open Web Floor Training
4 August 2009 to 5 August 2009
ITW Industry Office, Truro
Suitable for all levels, this course explains how to design SpaceJoist and FloorTrus jobs in Layout and TrusCAD.
Layout & Truscad Levels 1, 2 or 3
7 July 2009 to 9 July 2009
ITW Industry Office, Truro
Courses will be held at the level appropriate for the trainee.
Layout Level 1:
Suitable for the beginner; the purpose of this training course is to ensure that the individual attending the course leaves with a working knowledge of how to use the Layout program.
Layout Level 2:
Suitable for the Intermediate truss designer; as a progression from level 1 or for trainees with roof truss design experience but who are new to the VIEW software.
Layout Level 3:
Suitable for an advanced roof truss designer; as a progression from level 2, this course involves complicated roof truss framing.
TrusCAD Level 1:
Suitable for the beginner; the purpose of this training course is to ensure that the individual attending leaves with a greater knowledge of trussed rafters and the VIEW software.
TrusCAD Level 2:
Suitable for the Intermediate truss designer; as a progression from level 1 or for trainees with roof truss design experience but who are new to the VIEW software.
TrusCAD Level 3:
Suitable for an advanced roof truss designer; as a progression from level 2, this course goes into depth on many aspects of loading.
Open Web Floor Training
2 June 2009 to 3 June 2009
ITW Industry Office, Truro
Suitable for all levels, this course explains how to design SpaceJoist and FloorTrus jobs in Layout and TrusCAD.
Layout & Truscad Levels 1, 2 or 3
12 May 2009 to 14 May 2009
ITW Industry Office, Truro
Courses will be held at the level appropriate for the trainee.
Layout Level 1:
Suitable for the beginner; the purpose of this training course is to ensure that the individual attending the course leaves with a working knowledge of how to use the Layout program.
Layout Level 2:
Suitable for the Intermediate truss designer; as a progression from level 1 or for trainees with roof truss design experience but who are new to the VIEW software.
Layout Level 3:
Suitable for an advanced roof truss designer; as a progression from level 2, this course involves complicated roof truss framing.
TrusCAD Level 1:
Suitable for the beginner; the purpose of this training course is to ensure that the individual attending leaves with a greater knowledge of trussed rafters and the VIEW software.
TrusCAD Level 2:
Suitable for the Intermediate truss designer; as a progression from level 1 or for trainees with roof truss design experience but who are new to the VIEW software.
TrusCAD Level 3:
Suitable for an advanced roof truss designer; as a progression from level 2, this course goes into depth on many aspects of loading.
Open Web Floor Training
7 April 2009 to 8 April 2009
ITW Industry Office, Truro
Suitable for all levels, this course explains how to design SpaceJoist and FloorTrus jobs in Layout and TrusCAD.
Layout & TrusCAD Level 3
9 December 2008 to 11 December 2008
ITW Alpine office, Truro
Layout Level 3: Suitable for an advanced roof truss designer; as a progression from level 2, this course involves complicated roof truss framing.
TrusCAD Level 3: Suitable for an advanced roof truss designer; as a progression from level 2, this course goes into depth on many aspects of loading.
Open Web Floor Training
2 December 2008 to 3 December 2008
ITW Alpine office, Truro
Suitable for all levels, this course explains how to design SpaceJoist and FloorTrus jobs in Layout and TrusCAD.
Layout & Truscad Level 2
11 November 2008 to 13 November 2008
ITW Alpine office, Truro
Layout Level 2: Suitable for the Intermediate truss designer; as a progression from level 1 or for trainees with roof truss design experience but who are new to the VIEW software.
TrusCAD Level 2: Suitable for the Intermediate truss designer; as a progression from level 1 or for trainees with roof truss design experience but who are new to the VIEW software.
Open Web Floor Training
4 November 2008 to 5 November 2008
ITW Alpine office, Truro
Suitable for all levels, this course explains how to design SpaceJoist and FloorTrus jobs in Layout and TrusCAD.
Open Web Floor Training
16 September 2008 to 17 September 2008
ITW Alpine office, Truro
Suitable for all levels, this course explains how to design SpaceJoist and FloorTrus jobs in Layout and TrusCAD.
Layout & Truscad Level 1
9 September 2008 to 11 September 2008
ITW Alpine office, Truro
Layout Level 1: Suitable for the beginner; the purpose of this training course is to ensure that the individual attending the course leaves with a working knowledge of how to use the Layout program.
TrusCAD Level 1: Suitable for the beginner; the purpose of this training course is to ensure that the individual attending leaves with a greater knowledge of trussed rafters and the VIEW software.
Open Web Floor Course
14 August 2008 to 15 August 2008
ITW Alpine office, Truro
Suitable for all levels, this course explains how to design SpaceJoist and FloorTrus jobs in Layout and TrusCAD.
Layout & TrusCAD Level 3
6 August 2008
ITW Alpine office, Truro
Suitable for an advanced roof truss designer; as a progression from level 2, this course involves complicated roof truss framing.
Open Web Floor Course
5 August 2008
ITW Alpine office, Truro
Suitable for all levels, this course explains how to design SpaceJoist and FloorTrus jobs in Layout and TrusCAD.
Open Web Floor Course
29 July 2008 to 30 July 2008
ITW Alpine office, Truro
Suitable for all levels, this course explains how to design SpaceJoist and FloorTrus jobs in Layout and TrusCAD.
Floor Training
21 May 2008
ITW Alpine, Truro
This course is aimed at those how are already familiar to the roof truss design aspect of VIEW who wish to learn how to design floor layouts with the software. Trainees will learn how to input and engineer both FloorTrus and SpaceJoist floor layouts. The trainees will be taken through the complete design process from pre design settings to the modification of joists post initial input.
If you would like to book a place on this course, please call 01872 245456
Layout & Truscad Level 1
13 May 2008
ITW Alpine, Truro
This course is intended for new users of VIEW. Trainees will be taken through the steps to design full trussed rafter roofs in LAYOUT, and will learn how to modify roof trusses in TRUSCAD.
Alpine Customer Conference '06
14 May 2006 to 16 May 2006
Grand Hotel Minerva, Florence & Pisa
Alpine Automation's 2006 Customer Conference will be held from 14 to 16th May in Florence. It will be based at the luxurious Grand Hotel Minerva.
Customers and their wives and partners will spend days sight seeing and evenings wining and dining.....mixed of course with some business. Details of the hotel can be found on www.grandhotelminerva.net
Layout & TrusCad
5 December 2005 to 10 December 2005
Alpine Office, Farnham
Trainees will cover Layout & TrusCad Level 1, 2, 3, and Advanced Layout.
AiMS for Managers
18 October 2005 to 19 October 2005
Alpine Office, Farnham
October 18th and 19th AIMS for Managers.
A complete run through of the features of Aims from entering a project to creating an Invoice.
The course will also look into the information available through Management reports, quotation history, Customer lists etc.
The course is aimed at Managers.
Building Component Manufacturers Conference
12 October 2005 to 14 October 2005
Midwest Airlines Center, 400 W. Wisconsin Avenue, Milwaukee, WI 53203
There's always a buzz of excitement in the Alpine booth as attendees experience the industry's latest and most advanced equipment, software, products, and services. Alpine software is redefining the industry with revolutionary new programs designed to let the entire building community work together in better and faster ways. Be sure to see for yourself major improvements to Alpine's component design, information management systems, and plant connectivity software that go well beyond whole house design. Learn how Alpine Structural Consultants can help you extend more services and solutions to your customers. Plan to expand your business with the undeniable advantages of Alpine's steel truss system. See demonstrations of the latest in cutting technology and learn more about the most complete line of component fabrication equipment, including wood truss, steel truss, and wall panel systems. Find out how our finance experts can deliver that new equipment without tying up your critical working capital. Discover how our full-service passionate approach to business has helped Alpine customers to consistently grow above and beyond their competitors. Alpine Engineered Products, Inc. - technology-driven products and services for the building industry.
Extract from BCMC website.
Contact Mike Thomas for further information.
Introduction to Intellicad
27 September 2005 to 28 September 2005
Alpine Office, Farnham
This course willl cover in detail the creation of Drawings from View.
We will then cover the basics of creating drawings in Intellicad. Creating a drawing template, model and paper space, Viewports, worked examples and more.
The course is aimed at View users who have completed at least the layout level 1 course.
Introduction to Intellicad
6 September 2005 to 7 September 2005
Alpine Office, Farnham
This course willl cover in detail the creation of Drawings from View.
We will then cover the basics of creating drawings in Intellicad. Creating a drawing template, model and paper space, Viewports, worked examples and more.
The course is aimed at View users who have completed at least the layout level 1 course.
Regional Conference "A Time of Change"
7 July 2005
Corus Hotel, Bristol
Regional Conference "A Time of Change"
5 July 2005
Last Drop Hotel, Bolton
Regional Conference
28 June 2005
Holiday Inn, Dublin Airport, Dublin
